Description

Aero Tech Momentum Sprint Cycling Jersey

A Cycling Jersey Made with Quality Materials Available for All Sizes!

Aero Tech Designs presents the red and black Momentum Sprint Cycling Jersey. The Momentum Jersey is available for everyone because of the extended size range, Small to 5X-Large, plus Tall Sizes, Medium to 4X-Large. The Jersey also has a high quality separating YKK Zipper and 3 rear storage pockets. The Momentum Sprint Jersey is made in the USA using high quality materials.

Features:

AeroDRI Fabric

Content: 100% Polyester
Weight: 190 Gram/yd
Long Lasting Color

Full Length YKK Zipper
Three Back Storage Pockets
3M Scotchlite Reflective Tab
Full Extended Size Range:

Standard Sizes - Small to 5X-Large
Tall Sizes - Medium to 4X-Large

Factory Direct Value - No Middleman or Retailer Price Mark-up
Made in the USA

Aero Tech Designs Jersey - Size Chart
	Size	Chest (inches)
	Small	34-36
	Medium	36-38
	Large	38-40
	X-Large	42-44
	XX-Large	46-48
	3XL	50-54
	4XL	54-56
	5XL	58-60
	Tall Size Adds 3" to Body and Sleeve Lengths - Tall Sizes not Available in Small, or 5X-large

Additional Photos and Features

Momentum Sprint Cycling Jersey Front Features

Momentum Sprint Cycling Jersey Back Features

AeroDRI Fabric Information

Momentum Sprint Cycling Jersey AeroDri Performance Polyester Fabric

Fabric Developed for Outdoor Performance, Wicking Moisture, and Specially Designed for printing a Vivid, Long Lasting Color

AeroDri™ is a wearable tech fabric that manages moisture away from the skin surface and through the fabric for evaporation. Moisture management is one of the key performance criteria in today’s apparel. Moisture management is the process of transporting moisture away from the skin to the garments outer surface. Moisture management often refers to the transport of both moisture vapor & liquid away from the body. Wetting and then Wicking is the nature of a technically designed fabric. In the heat summer and athletics, trapped sweat can heat up the body and lead to fatigue or diminished performance. When wearing a garment manufactured with AeroDri™ , the moisture vapor can pass through openings between filters of yarns. The polyester fibers are extruded in an angular shape and then knitted into a highly technical two stage fabric surface. The technical composition of fiber, fiber shape and knitting process all support the maintenance of body temperature.

When the body temperature heats up, sweat is produced. With a cotton garment, the sweat leads to "wetness" and increases clothing weight - especially in sweat prone areas like the neckline, chest, and arm pits. This wet is perceived as uncomfortable with a negative effect on performance. Moisture management with AeroDri™ leads to temperature control and enhanced comfort. Keeping cool with technical performance fabric means moisture management. Temperature control can be achieved by evaporation of water on the skin's surface.

The wicking of moisture gives wearer a dry feeling by spreading the liquid to evaporate easily. Hydrophilic fibers like cotton are attracted to and bind with water, meaning the moisture is retained with poor moisture release. Hydrophobic fibers are synthetic like polyester or nylon. These fibers do not hold moisture and depending on their shape, surface area, and small gaps in the construction, the surface has few bonding sites for water to bind. This means the fabric stays dry and has good moisture transportation and evaporation (wicking). Micro-fibers are key to the construction of AeroDri™ fabrics because of the fine fiber size and the knitted construction which contains small gaps and big surface areas for evaporation of moisture.

Specifications: