Home Page

White Lightning Original Self-cleaning Lubricants

White Lightning Self Cleaning Wax Lubricant

White Lightning Clean Streak Metal Prep

White Lightning Clean Streak Trigger Chain Cleaner

White Lightning EPIC Lubricant
Other lubes dry out or wash off during an all-day ride, but not "Epic" from White Lightning.

When dirt makes it’s way to the lubrication film, release agents are activated and small particles of the wax film flake off, taking with it the contaminant. This technology allows parts to stay clean and work more smoothly. If used regularly, you may never have to clean your chain again!   White Lightning Original can also be used to lube pedals, cleats, and brake and derailleur pivots.   Available Size: 4oz  Bottle

Application Tips for White Lightning Original:  Shake product to blend all liquids. On the first application, apply generously (10+ backward turns of the crank ). When reapplying, less product will be necessary 3-5 turns of the crank). Reapply after every ride or when drive train requires additional lubrication. Before riding, allow White Lightning Original to dry for 2 hours.

For MAXIMUM Self-Cleaning benefits, apply White Lightning Original to a clean, de-greased chain.

Clean Streak - Spray Cleaner is ideal for bicycle chains and grease removal

New cleaning-agent technology that lifts, strips and dissolves the nastiest of contaminants. Evaporates fast and leaves no residue.

Make your hi-performance lubricant work its best. Clean Streak Metal Prep is a "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high performance lubricants. New lube application, penetration and film adhesion is 100% maximized.

From end of the season wax lube buildup, to thick greasy carbonized grit, to new chain transit coatings..., Clean Streak will cut through it all! Fast action and thorough evaporation. Features a 360? swivel precision applicator.   VOC compliant ingredients. Exceeds today's most stringent health and environmental regulations.

Clean Streak Metal-Prep Application Tips and Techniques:

Spray Clean Streak directly onto drive train components, and allow the grease, grime and grit to run-off the bike. No water rinsing is required, and Clean Streak leaves no residue.  For stubborn contaminates, use a rag or a brush to loosen the encrusted soils, and then spray with Clean Streak.

Clean Streak’s No-Rinse, No-Residue formula is perfect for use on disc brake rotors, ands although Clean Streak is safe for use on all a bikes components, its intended use is for the removal of contaminates on the drive train. Be sure to use Clean Streak in a well-ventilated area, and eye protection is recommended.

The “Trigger” Chain Cleaning System.

The Trigger Chain Cleaning System uses the cleaning power of Clean Streak in conjunction with the scrubbing power of a chain cleaner to easily, quickly and effectively clean you chain in less than 20 seconds! The “Trigger” works on all drive train systems, including: MTB, BMX, road and single-speed bikes.

The Trigger Chain Cleaner Directions for Use:

Step 1: With the Chain Cleaner in the open position, place the chain cleaner over the chain. Pull the trigger back to close the chain cleaner around the chain.

Step 2: While back pedaling for 2-3 revolutions (using your right hand), depress the Clean Streak button. Continue turning the crank for an additional 2-3 revolutions without spraying the Clean Streak.