Description
Aero Tech Design Sprint Jersey - Galaxy
Space Themed Bike Jersey available in all Sizes!
Our Galaxy Design was developed in our Area 51 Design Center using space aged technologies. The fabric is a 100% sweat wicking polyester with great UPF (Ultraviolet Protection Factor) and Sun protection for close encounters with stars. The Sprint Cycling Jerseys fits all human lifeforms with extended sizing, X-Small to 5X-Large. The fabric is also a specialized printable fabric design to hold color for light years. The Galaxy Sprint Jersey comes complete with a full separating YKK zipper, 3 rear cargo pocket, and a reflective tab to signal UFO to stay way while riding in low light.
Abduct this jersey today!
Feature:
- AeroDri™ Fabric
- Content: 100% Polyester
- Weight: 190 Gram/yd
- Prepared for Print for Vivid, Long Lasting Color
- Club cut is tapered yet, roomy and comfortable
- Full Length Separating Zipper
- 3 Back Pockets provide easy access to personal items
- 3M Scotchlite Reflective Tab below pockets for Luminous visibility
- Elastic Around the Bottom Hem keeps the jersey snug
- Factory Direct Value - No Retailer Mark-up
- Made in the USA
- Sizes X-Small - 5X-Large
| Aero Tech Designs Jersey - Size Chart | |
|---|---|
| Size | Chest (inches) |
| X-Small | 30-33 |
| Small | 34-36 |
| Medium | 36-38 |
| Large | 38-40 |
| X-Large | 42-44 |
| XX-Large | 46-48 |
| 3XL | 50-54 |
| 4XL | 54-56 |
| 5XL | 58-60 |
Additional Product Photos:
 |
 |
 |
 |
 |
 |
 |
 |
 |
Fabric Information: AeroDri™
AeroDri™ is a wearable tech fabric that manages moisture away from the skin and through the clothing for evaporation. Moisture management is one of the key performance criteria in today’s apparel. Moisture management is the process of transporting moisture away from the skin to the garments outer surface Moisture management often refers to the transport of both moisture vapor & liquid away from the body. Wetting and then Wicking is the nature of a technically designed fabric. In the heat summer and athletics, trapped sweat can heat up the body and lead to fatigue or diminished performance. When wearing a garment manufactured with AeroDri™ , the moisture vapor can pass through openings between filters of yarns. The polyester fibers are extruded in an angular shape and then knitted into a highly technical two stage fabric surface. The technical composition of fiber, fiber shape and knitting process all support the maintenance of body temperature.
When the body temperature heats up, sweat is produced. With a cotton garment, the sweat leads to "wetness" and increases clothing weight - especially in sweat prone areas like the neckline and arm pits. This wet is perceived as uncomfortable and with a negative effect on performance. Moisture management with AeroDri™ leads to temperature control and enhanced comfort. Keeping cool with technical performance fabric means moisture management. Temperature control can be achieved by evaporation of water on the skin's surface.
The wicking of moisture gives wearer a dry feeling by spreading the liquid to evaporate easily. Hydrophilic fibers like cotton are attracted to and bind with water, meaning the moisture is retained with poor moisture release. Hydrophobic fibers are synthetic like polyester or nylon. These fibers do not hold moisture and depending on their shape, their surface area and their small gaps in construction, the surface has few bonding sites for water to bind. This means the fabric stays dry and has good moisture transportation and evaporation (wicking). Micro-fibers are key to the construction of AeroDri™ fabrics because of the fine fiber size and the knitted construction which contains small gaps and big surface areas for evaporation of moisture.
- Content: 100% Polyester
- Weight: 190 Gram/yd
- Prepared for Print for Vivid, Long Lasting Color
Complete the Kit!
Fabric: 100% AeroDri Polyester